Double Glazing Lock Repair
Double-glazed windows are popular among homeowners who wish to increase the energy efficiency and security of their homes. Windows are susceptible to being damaged or worn out over time.
Many problems with double glazing can be resolved without having to replace the window unit. By lubricating and tightening the screws, you can fix sagging windows or handles, as well as stiff or misting handles.
Damaged or Worn Locks
If a lock has been damaged or worn, it could be quite risky and make you vulnerable to break-ins. This may be due to general wear and tear, or damage caused by burglars. If you know what to look out for, replacing or repairing the locks is relatively easy.
Double glazing window handles can be difficult to open. This is often because of a defective lock mechanism, which can cause the handle to become stuck when trying to close or open. Find the double-glazing handle and lock specialist in your area to replace the handles.
Another common problem with window locks made of uPVC is that they can become misaligned, preventing the door from locking properly. This could be due to a variety of factors, such as inadequate installation or the weathering. In some instances, you can correct this by removing the weatherstripping and moving it further back. In other instances, you might need to replace the cylinder or adjust the strike distance on the inside of your door frame.
It is important to select a double-glazing repair service that has skilled technicians. This will ensure that the job is done properly. Check out reviews from customers to find out what other customers have said about their experiences with the company. Also, make sure that the company has insurance and an official guarantee, so that you can be confident in their work.
If you're having trouble locking your uPVC windows, try using a silicon spray to lubricate the lock. This will allow you to loosen the bolts that are stuck and make it easier for them to engage with keyholes. Regularly oiling the lock is a good way to prevent it from becoming stiff or unresponsive.
A broken lock could be an indication that it's been picked or tampered with, so you should change your locks as soon as possible. Stockport double glazing is crucial to change locks if you have recently moved into the property. Previous tenants might have copies of your keys from the beginning.
Locks that are difficult to open
The main problem that double-glazing owners mentioned in our survey was windows and doors becoming difficult to open and close. In most cases, these problems can be solved without replacing the entire window or door. In certain cases, lubricating the hinges, handles, and mechanisms can resolve the issue. If this does not work, it may be worth having a locksmith take a closer examine to determine the cause of the problem is.
A lock can become difficult to open as it has become stiff or sticky. This could be due to dirt, heat or a wrong key. A professional will be able to determine whether this is the case and can repair the lock, typically without the need to replace it.
Powdered graphite is a good method to lubricate locks. This can be purchased in small tubes from most home improvement stores and automotive shops. To use it, simply put a small amount in the keyhole, then insert the key repeatedly to spread the graphite around. You could also use the lead of a pencil, but ensure that it's made of graphite, rather than wood shavings. Graphite will help lubricate the lock and make it easier to open.
The cylinders might not be aligned properly, which can cause stiff or sticky locks. This is often the case if the door has been hit at times and is solved by re-aligning the locks. The door could also be difficult to open if the hinges are loose. The hinges on the door need to be tightened if this is the case.
Another reason that can lead to an unlocked door is that the key has been snapped in the lock. This can be a serious security problem since it takes only 30 minutes for an intruder snap off a conventional euro barrel cylinder. It isn't easy to remove the broken piece from the lock, however it's possible using a flathead screwdriver or needle nose pliers, and a bit of patience.
Locks that Aren't Functioning Correctly
Windows that won't close properly are more than just a nuisance. They could let in drafts, compromise home security and increase your energy bills. Burglars are known to swoop through open windows to access your home, so having secure locks is a good way to keep them out. If your window locks do not perform as they should, they need to be repaired as soon as you can to prevent them from becoming more of trouble.
There are a variety of reasons your uPVC window may not lock properly. The bolts may have been incorrectly aligned. This can be caused by repeated slamming or swelling, and contraction during cold and hot conditions, or due to wear and tear. This can stop the bolts from getting into the locking position. They won't lock properly if you close the handle.
Another reason could be that the locking system itself is faulty. This is the case if you have a Saracen lock on your window. They are usually found on uPVC casement windows that have aluminium frames. They are renowned for their distinctive flat strip design and as they turn they work in harmony with the security of multi-point locks placed around the frame to secure the window. They also come with a security upgrade to provide additional security against forced entry.
If you're having issues with your uPVC double-glazed window the best thing you can do is get in touch with a dependable and experienced professional. They can examine your window to pinpoint the issue. This will save you money by avoiding having to replace the entire window unit.
They can also often find the issue faster than you'd think. They can identify the window model via phone, and then find an alternative at a reasonable cost. They can then fit the replacement part to your uPVC window without replacing the entire mechanism.
Replacement
Owen the Locksmith offers a range of replacement locks for your uPVC double glazing, uPVC windows or doors. There are single point locks as well as multipoint locking systems, as well as different handle types. Also available is a range of hinges, striker plates, and various handles. Our team can also modify your uPVC or double glazing mechanisms to ensure that they operate in a different manner to fit your needs and the ways you utilize your windows and doors.
One of the most common issues that is common to uPVC windows and doors is that they'll lose their ability to shut properly and can cause flooding and even draughts within your home. This is usually a sign that the gaskets have shrunk and are unable to hold the gasses that insulate between the glass panes. If you suspect that this is the case, call the company that installed your double-glazed windows. Ask them for a replacement of the gasket seals.
This is a much cheaper option than having to replace the entire window unit. It also helps you save money by allowing more heat in your home. If you decide to replace the seals on your windows be sure to purchase them from a reputable company.
Another issue that is common to uPVC windows and door is that they'll become difficult to open, typically due to a stiff hinge or a broken mechanism. You can try a few DIY solutions to this problem by cooling the hinge or oiling the mechanism however, if you do not get the results you want you may have to get a professional to repair it.
Most people install quality anti-burglar equipment on their the front door and gates however, they tend to neglect the windows. A broken lock can compromise your home's security. A faulty lock can allow unwelcome guests to enter your home, which makes it important to get the issue repaired as quickly as is possible. The good news is that there are plenty of Glaziers in Lincoln who can assist you solve the issues with your uPVC windows, including damaged handles and malfunctioning locking mechanisms. And they can often do so without compromising the style of your home.